We respect your privacy and will only collect and use your personal information with your consent. We follow strict security measures to protect your data and will not share it with any third parties without your permission.

GPS Mouse Receiver- High precision RTK+GNSS positioning

Cover Bands : L1+L5

LNA Gain: 11±2 dB

Positioning accuracy: 
Single point positioning: 1.5m CEP(horizontal), 2.5m CEP(vertical)
RTK positioning: 1.0cm+1ppm(horizontal), 1.5cm+1ppm(vertical)

GNSS operating limits:
Maximum speed: 500 m/s
Altitude: 50,000 m

Application:Car, logistic, car rental, robots, drones, automatic driving, Mower, bus, scooter, sharing bike/e-bike, and etc.

Product Details

Product Tags

Overview

This GPS mouse receiver supports Beidou, GPS, GLONASS, Galileo, and QZSS satellite signals in L1+L5 bands. It is capable of capturing and tracking any multi-satellite hybrid signal, independent of the RTK ground enhanced base station system.  In complex urban environment, it can still achieve stable and higher cm level positioning accuracy.  


Key Features

image.png

image.png

image.png

 CM Level Position Accuracy4 Satellite system Plug & play

This GPS mouse receiver intergrate RTK and GNSS module, the RTK positioning accuracy meets 1.0cm+1ppm(horizontal), 1.5cm+1ppm(vertical).

Support by 4 satellite systems, even without difference from RTK, the position accuracy can also reach 1.5m CEP(horizontal), 2.5m CEP(vertical).The GNSS antenna+GNSS module+RTK module in one body design, which simply the integration with host device. Just plug the GPS mouse receiver to the device,so user can collect the position data directly from the receiver. 


Specification

Center Frequency1176.45MHz~1561.098MHz~1575.42MHz
Output VSWR ≤2.0
Output Impedance50ohm
Peak Gain L5≥1dB L1/B1≥2.5dB
Efficiency (%) ≥45
Axial Ratio(dB) ≤6
Polarization R.H.C.P
LNA Gain 11±2 dB
Output V.S.W.R 2.0 max
Voltage Range 3.3 V to 5 V
Current 50±10 mA
Impedance 50Ω
Temperature -40℃ to +85℃
1.2 GNSS Technical Specifications
Parameter specification
GNSS tracking Channel 200
GNSS receives frequency points• GPS/QZSS: L1C/A, L5BDS: B1C, B1I, B2a, B2I, B3I
• BDS: B1, B2A, B2B,B2l
• Galileo: E1, E5
• GLONASS: G1
Data update rate• PVT: The default value is 1Hz and the maximum value is 20Hz
• RTK: The default value is 1Hz and the maximum value is 10Hz
Positioning accuracy• Single point positioning: 1.5m CEP(horizontal), 2.5m CEP(vertical)
• RTK positioning: 1.0cm+1ppm(horizontal), 1.5cm+1ppm(vertical)
Speed and time accuracy• GNSS: 0.1m/S CEP
• 1PPS: 15 nS(RMS)
First positioning (TTFF) time• Hot start: 1 second
• Cold start: 28 seconds
• AGPS: 1.5s
sensitivity• Cold start: -148 DBM
• Hot start: -159dBm
0Recapture: -159dBm
• Tracking and navigation: -165 DBM
GNSS operating limits• Maximum speed: 500 m/s
• Altitude: 50,000 m
UART port• UART ports: TX and RX
• Baud rate 115200 bps, 8 data bits, no parity, 1 stop bits (default)
• 1Hz: GGA,GSA,GSV,VTG,RMC,GST,GLL
Temperature range• Normal operation: -40°C ~ +85°C
• Storage temperature: -40°C ~ +80°C


Product Application:

This GPS-mouser can be widely used in the application required high precision position and navigation i.e. 

◼ Front loading car factory

◼ Public transport, commercial vehicle, freight truck market

◼ Car rental, ride-hailing and car-sharing companies;

◼ Robots, drones, unmanned ships, low-speed unmanned vehicles;

◼ High-precision positioning of vehicles in port, wharf, warehouse and other environments;

◼ Low speed automatic driving, automatic parking;

◼ Vehicle insurance UBI, Internet of Vehicles, Automotive big Data.

1716694435446131.jpg

 video


  • PREVIOUS:Full frequency satellite repeating system
  • NEXT:Survey GNSS Antenna full frequency 40DB

  • Leave Your Message
    Write your message here and send it to us