12dbi 860-930mhz Directional Helium LoRa antenna for high elevation
12dbi 860-930mhz Directional Helium lora antenna for high elevation location
Overview
Four-port wall mounted antenna wireless communication equipment with four independent signal output ports, wall mounted, easy deployment and use in a variety of environments, support multi-band, 860-930mhz, in mobile communication networks, wireless network coverage, Internet of Things (IoT) deployment and other fields, Provides wide coverage and optimizes network performance.
Key Features
Take out the antenna and spares, prepare installation tools (Spanner) | Install the antenna to a ∅30~75mm mast with the mounting kits screw and mounting sawtooth kits, Antenna should be parallel with the mast, completely compress the top mounting kits, adjusting the installation height, then tighten the top and bottom nuts of mounting kits screw. | Adjust the antenna declinate angle, tighten the nut mark with★ above. | Connect cable to antenna connector by following the polarization Label, put on waterproof glue/tape. Then the installation is done. |
Parameters
Frequency Range | 860-930MHz |
Gain(dBi) | 12±0.5dBi |
VSWR | ≤1.5 |
Polarization | Vertical |
Horizontal Beamwidth (0º) | 65±10º |
Vertical Beamwidth (0º) | 30±10º |
Front-to-back ratio(dB) | ≥22 |
Electrical lower inclination(0º) | 0º |
Input Impedance(Ω) | 50Ω |
Maximum input power(W) | 100W |
Input connector type | N-Female |
Lightning Protection | DC Ground |
Dimension- mm(Height/Width/Depth) | 750*280*125mm |
Packing size(mm) | 925*345*220mm |
Antenna weight(kg) | 6.20kg |
Rated Wind Velocity(m/s) | 43m/s |
Operational Humidity(%) | 10- 95 |
Color | Grey |
material | UPVC |
Operating temperature(ºC) | -30~65 º |
Installation Method | Mast Installation |
Mounting hardware(mm) | ¢30~¢75 |
Mechanical tilt(º) | 0-10º |
Application
Write your message here and send it to us